Transfer Paper - Watercolour Branches
 
Please read below for instructions - please note the transfers turn matte after baking.
 
Instructions will be provided with the product
 
For best results transfers should be used on white or light coloured clay – FIMO or CERNIT for best results
Optimal baking temperature is 110degrees, colours may fade a little bit at 135degrees. Depending on what brand of clay you use will determine the bake time
 If you are using a sticker clay such as Cernit or Fimo step 2 does not need to happen. Use step 2 for Sculpey
 However if your clay is a bit dry we recommend using this step

1. Condition your clay and lay out on your work surface
2.  Mix Sculpey Liquid Clay through your clay until it has a tacky feel to the surface – the transfers need a moist surface to work
3. Lay your transfer print (print side down) onto the surface of your clay. Rub your fingers over the transfer ensuring all parts of the transfer are in contact with your clay.
4. Leave for 30mins – Be Patient 😊
5. Lift the transfer to make sure the image is fully transferred – if not leave another 5-10mins
6. Remove your transfer paper – avoid touching the surface as this can smudge the ink
7. Bake your clay as usual – you will get a matte result after baking
8. If you would like more vibrant colours use a glossy varnish or resin 
We recommend having a play around with the test piece provided 
 
 
14cm x 14cm